Aiman Metals provides high-strength Aluminium 2014 Forgings from its modern facility in Kuala Lumpur, Malaysia. As a copper-based aluminium alloy, 2014 is known for its excellent machinability and strength, making it ideal for aerospace and heavy-duty structural applications. We produce our forgings using top-quality raw materials and precision forging techniques to ensure consistent performance and quality. Aiman Metals supports industries with custom 2014 aluminium forgings for complex applications that require high mechanical strength, precision, and durability under stress.
Aluminium 2014 contains copper (3.9–5.0%), manganese (0.4–1.2%), and magnesium (0.2–0.8%). It provides high tensile strength of up to 483 MPa and excellent fatigue resistance. It is a heat-treatable alloy, often used in T6 or document_number_1 conditions, to improve its hardness and mechanical properties. While it offers superior strength, its corrosion resistance is lower than that of other aluminium grades and may need protective coatings. 2014 also has excellent machinability, making it suitable for complex, high-precision forged components.
Standards : ASTM B247, B247
Temper : T6 T651 T6511
Specification : DIN, ASTM, BS and all International Standards
Flat bar blocks : up to 27″ width and 15,000 lbs.
Cylinders and sleeves : up to 50″ maximum O.D. and 65″ maximum length
Discs and hubs : up to 50″ diameter and 20,000 lbs.
Rolled, hand forged or mandrel forged rings : up to 84″ maximum O.D. and 40″ maximum length
Rounds, shafts and step shafts : up to 144″ maximum length and 20,000 lbs.
| Aluminium 2014 | Fe | Si | Mg | Mn | Cu | Zn | Ti | Al |
| 0.7 | 0.50 – 1.20 | 0.2 – 0.8 | 0.4 – 1.2 | 3.9 – 5.0 | 0.25 | 0.15 | 93.5 |
| Material | Temper | Diameter (mm) | Tensile Strength min ((N/mm²) | Yield Strength (min) (N/mm²) | Elongation on 5.65 V (min) |
| 2014 Bar | T4 | <20 | 370 | 230 | 11 |
| 2014 Bar | T4 | 20-75 | 390 | 250 | 11 |
| 2014 Bar | T4 | 75-150 | 390 | 250 | 9 |
| 2014 Bar | T4 | 150-200 | 370 | 230 | 8 |
| 2014 Bar | T6510 | 20-75 | 480 | 435 | 7 |
| 2014 Bar | T6510 | 75-150 | 465 | 420 | 7 |
| 2014 Bar | T6510 | 150-200 | 435 | 390 | 7 |
| STANDARD | UNS | WERKSTOFF NR. | European Standard | BS (OLD) | ISO | USA (AA) | GERMANY (DIN) | IS | Canadian |
| Aluminium 2014 | A92014 | 3.1255 | EN AW-2014 | HE15 | AlCu4SiMg | 2014 | AlCuSiMn | 24345 | B26S |
Yes, Aluminum 2014 is suitable for high-temperature forging applications due to its excellent strength, thermal resistance, and good machinability, making it ideal for aerospace and automotive components.
Aluminum 2014 offers high strength, excellent machinability, good wear resistance, and superior performance under high-stress conditions, making it ideal for aerospace, automotive, and structural custom forgings.
Aluminium 2014 Forgings are commonly used in the aerospace industry for aircraft fittings, structural components, and landing gear parts. They are also found in military applications, heavy equipment manufacturing, and truck frames where high strength and reliability are essential. This alloy is suitable for precision-machined parts that must endure high loads and fatigue. Forgings made from 2014 are preferred in engineering applications where mechanical strength is more important than corrosion concerns and where the component requires machining after forging.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Aiman Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Kuala lumpur, Malaysia
Copyright 2024 Aiman Metals. All rights reserved
