Aiman Metals provides high–quality Nimonic 75 Rods and Bars in Kuala Lumpur, Malaysia. Nimonic 75 is a nickel-chromium alloy with outstanding heat resistance, oxidation resistance, and moderate high-temperature strength. It is extensively utilized in static load applications at higher temperatures including sheet metal fabrications for aerospace, gas turbines, and parts used in industrial furnaces. Aiman Metals maintains uniform quality and accurate machining of Nimonic 75 bars and rods used in high-temperature and corrosive environments. We provide customized sizing and specifications to fit varied industrial and aerospace needs.
Nimonic 75 contains about 80% nickel and 20% chromium, together with traces of titanium and carbon. It has good tensile strength, commonly to 850 MPa, and maintains structure integrity up to 1000°C. The alloy possesses superior resistance to oxidation, carburization, and scaling and is thus appropriate for continuous use in high-temperature conditions. It also provides fair creep resistance, as well as good weldability, and can be easily formed for intricate engineering applications.
Dimension : EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade : Nimonic 75 (UNS No. N06075) Round Bars
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Application : Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining
Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.
Our Nimonic Alloy 75 Round Bars conforms to NACE MR0175/ISO 15156
| Grade | C | Ni | Cu | Cr | Ti | Fe | Mn |
|---|---|---|---|---|---|---|---|
| Nimonic Alloy 75 | 0.08 / 0.15 | Bal | 0.5 max | 18.9 – 21.0 | 0.2 / 0.6 | 5.0 max | 1.0 max |
| Density | Modulus of Elasticity | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.37 g/cm3 | GPa – 206 | MPa – 750 | MPa – 275 | 42 % |
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Nimonic Alloy 75 | – | N06075 |
Yes, Nimonic 75 bars can be recycled after use. They are composed of valuable nickel-chromium alloys, making them suitable for recycling to recover and reuse their high-performance material properties.
Yes, Nimonic 75 Bar can be welded using TIG or MIG welding methods. Proper preheating, post-weld heat treatment, and the use of matching filler materials are essential for success.
Nimonic 75 rods are available in various sizes, typically ranging from 0.125" to 6" in diameter. Common finishes include cold drawn, hot rolled, and polished, depending on application needs.
Nimonic 75 Bars and Rods find applications in aerospace engine, gas turbine, nuclear reactor, and industrial heater applications. Common components are exhaust ducts, turbine casings, heat shields, fasteners, and linings for furnaces. The alloy is similarly well suited for forming and fabrication in aerospace assemblies needing oxidation resistance at elevated temperatures. In addition, Nimonic 75 is used in thermal processing equipment and gas turbine combustor components where metal integrity under long-term thermal exposure is vital. Its excellent high-temperature capability and sound mechanical strength make it a good choice for demanding heat-based applications.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Aiman Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Kuala lumpur, Malaysia
Copyright 2024 Aiman Metals. All rights reserved
