Chuck Metals is a trusted manufacturer and supplier of Stainless Steel 304L Rectangular Bars, conveniently located in Pulau Ujong, Singapore. Known for their commitment to quality, Chuck Metals serves a variety of industries, including marine, construction, food processing, pharmaceuticals, and petrochemicals. Their 304L rectangular bars are crafted using cutting-edge manufacturing and finishing techniques, which guarantee top-notch surface quality, straightness, and precise dimensions. They also provide custom sizes and cutting services tailored to meet specific needs. With a focus on performance and precision, Chuck Metals has established itself as a go-to partner for clients looking for durable and corrosion-resistant stainless steel solutions.
These Stainless Steel 304L Rectangular Bars contain about 18% chromium and 8% nickel, along with a lower carbon content (maximum 0.03%) compared to standard 304. This unique composition boosts corrosion resistance, particularly after welding, by reducing the chances of carbide precipitation. The material boasts a tensile strength ranging from 485 to 700 MPa and a yield strength of around 170 MPa. It also demonstrates good elongation and toughness across a broad temperature spectrum. The rectangular shape provides excellent structural stability and strength, making it perfect for load-bearing and fabrication tasks that require consistent cross-sectional geometry and resistance to oxidation.
| Specifications | ASTM A 276 / SA 276 |
|---|---|
| Dimensions | ASTM, ASME |
| Range | 3.17 MM TO 350 MM DIA |
| Diameter | 25mm to 152m |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Finish | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc., |
| Condition | Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304L | 0.035 max | 2.0 max | 1.0 max | 0.045 max | 0.03 max | 18 – 20 | – | 8 – 13 | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| STANDARD | BS | UNS | JIS | EN | DIN | WERKSTOFF NR. | GOST | AFNOR |
| SS 304L | 304S11 | S30403 | SUS 304L | X2CrNi18-9 / X2CrNi19-11 | 1.4307 | 1.4307 | 08Х18Н10 | Z3CN18‐10 |
Yes, Stainless Steel 304L Rectangular Bars can be welded. They have excellent weldability, even without preheating, due to their low carbon content.
Yes, Stainless Steel 304L Rectangular Bars can be used for underground applications. Their corrosion resistance and durability make them suitable for environments with moisture and soil exposure.
Stainless Steel 304L Rectangular Bars do not have a specific pressure rating as they are not typically used in pressure-rated applications. Their strength and resistance to corrosion make them suitable for structural and general-purpose uses.
304L Stainless Steel Rectangular Bars are commonly used in situations where corrosion resistance, formability, and weldability are crucial. In construction and architecture, they serve as structural frameworks, brackets, supports, and handrails. The food and beverage sector relies on them for hygienic equipment, tables, and structural components, thanks to their non-reactive and easy-to-clean surfaces. In marine settings, these bars are ideal for parts that come into contact with moisture and saltwater. They are also utilized in pharmaceutical and chemical processing facilities for equipment frames.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Aiman Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Kuala lumpur, Malaysia
Copyright 2024 Aiman Metals. All rights reserved
